7/44 Single Core Cable Price per Coil in Pakistan: 2026 Comprehensive Buyer’s Guide
Choosing the right electrical wiring for your home or project isn’t just about finding the lowest price; it is about safety, efficiency, and long-term peace of mind. If you are currently navigating the Pakistani market for 7/44 single core cable, you have likely noticed that prices can fluctuate weekly.
As of May 2026, the price for a 90-meter coil of 7/44 single core cable in Pakistan generally ranges between Rs. 28,000 and Rs. 32,000, depending on the brand and copper purity.
In this guide, we will break down the technical specifications, current market rates, and the “Expertise, Experience, Authoritativeness, and Trustworthiness” (E-E-A-T) factors you need to consider before making a purchase.
Understanding the 7/44 Single Core Cable
The “7/44” designation refers to the construction of the conductor: 7 strands of copper, each with a diameter of 0.044 inches. In the metric system, this is roughly equivalent to a 6 mm² cable.
This specific gauge is a “workhorse” in Pakistani construction. It is primarily used for:
- Main Wiring: Connecting the main distribution board to individual rooms.
- High-Load Appliances: Powering Air Conditioners (up to 1.5 or 2 tons), large water pumps, and electric heaters.
- Commercial Use: Reliable for shops and small offices where multiple computers or heavy lighting are used.
Current 7/44 Cable Price per Coil in Pakistan (May 2026)
Electrical cable prices in Pakistan are heavily tied to the international LME (London Metal Exchange) copper rates and the local USD-to-PKR exchange rate.
| Brand Name | Estimated Price (90m Coil) | Quality Standard |
| Pakistan Cables | Rs. 31,000 – 32,500 | 99.9% Pure Copper / BS 2004 |
| Fast Cables | Rs. 30,500 – 31,800 | Real Quality / PSQCA Certified |
| GM Cables | Rs. 29,000 – 30,500 | Standard Grade |
| Newage Cables | Rs. 30,000 – 31,500 | High Conductivity |
| Local/Unbranded | Rs. 24,000 – 26,500 | Variable (Caution Advised) |
Note: Always confirm the length of the coil. While the industry standard for a “full coil” is 90 meters, some local manufacturers sell 75-meter or 80-yard coils at a lower price point to appear more competitive.
1. Experience (The “Touch” of Quality)
An experienced electrician or contractor knows that 7/44 cable should have a certain “heft.” High-quality 7/44 cable typically weighs around 7.5kg to 8kg per 90-meter coil. If a coil feels suspiciously light, it likely contains “under-gauge” wire or impure copper mixed with aluminum (CCU).
2. Expertise (Technical Compliance)
Trustworthy brands adhere to PSQCA (Pakistan Standards and Quality Control Authority) and international BS 2004 or IEC 60227 standards. These standards ensure the PVC insulation is fire-retardant and the copper resistance is low enough to prevent overheating.
3. Authoritativeness (Brand Reputation)
Brands like Pakistan Cables and Fast Cables have built decades of authority. They provide “Type Test” certificates and use oxygen-free copper. Using an authoritative brand reduces the risk of “voltage drop,” which can damage your expensive inverter ACs and refrigerators.
4. Trustworthiness (The Real Cost of Cheap Wire)
A “cheap” 7/44 coil might save you Rs. 5,000 today, but it could cost you lakhs tomorrow.
- Higher Electricity Bills: Impure copper has higher resistance ($R$), leading to energy loss as heat ($P = I^2R$).
- Fire Hazards: Substandard PVC insulation can melt under load, leading to short circuits.
How to Verify a 7/44 Cable Coil
Before you hand over your cash at the hardware store in Rawalpindi, Lahore, or Karachi, perform these three quick checks:
- The Scratch Test: Use a knife to scratch the surface of a strand. If the reddish color disappears to reveal a silvery-white center, it is copper-coated aluminum—do not buy it.
- The Flame Test: Hold a lighter to a small piece of the PVC insulation. High-quality insulation should be self-extinguishing and not drip like wax.
- Check the Stamp: Ensure the cable skin is clearly embossed with the brand name, “7/.044,” and “99.9% Pure Copper.”
Factors Influencing Prices in 2026
The volatility in Pakistan’s market is driven by:
- Copper Commodity Prices: Copper is trading near $11,000 per tonne globally, keeping local prices high.
- Energy Costs: Increased manufacturing costs in industrial zones (S.I.T.E, Sundar, etc.) are passed down to the consumer.
- Import Duties: Taxes on raw PVC resin and specialized chemicals affect the final retail price.
Final Recommendation
For a standard 3-bedroom house in Pakistan, the 7/44 single core cable is your best bet for main circuit lines. While the current price of ~Rs. 30,000 per coil may seem steep, it is an investment in your family’s safety.
Pro Tip: Always buy from authorized dealers to avoid “copy” cables that look identical to premium brands but use inferior materials.