TOXFREE ZH RZ1FZ1-K (AS)

Overview

Description

Halogen free (LSZH) armoured cable with steel or aluminium tape armour.

An armored LSZH safety cable is TOXFREE ZH RZ1FZ1-K AS. It does not release harmful or corrosive gases in the event of a fire, safeguarding the public's health and preventing potential harm to electronic devices. Its use is therefore strongly advised for public areas, rodent-infested installations, and installations in general where there is a chance of mechanical aggression to the cable.

Performance of the TOXFREE ZH RZ1FZ1-K AS cable

Electrical functionality

MINIMUM VOLTAGE 0,6/1kV

Typical

UNE 21123-4 and IEC 60502-1

Acceptances

RoHS

Regulation of CPR Construction Products

Cca-s1b, d1, a1

Thermal efficiency

90ºC is the maximum conductor temperature.

250ºC is the maximum short-circuit temperature (maximum 5 s).

-40ºC is the minimum service temperature for protected and fixed installations.

Performance of fire

non-propagation of flames according to IEC 60332-1 and EN 60332-1.

non-propagation of fire according to IEC 60332-3 and EN 60332-3.

Low Smoke Zero Halogen, or LSZH, is based on IEC 60754-1 and EN 60754-1.

According to EN 61034 and IEC 61034, low smoke emissions: Transmittance of light > 60%

low emissions of corrosive gases in accordance with IEC 60754-2 and EN 60754-2.

Performance of mechanical systems

A cable diameter of x10 is the minimum bending radius.

AG4 High severity is the impact resistance rating.

Proof against rodents

Performance of chemicals

Resistance to chemicals and oil: Acceptable.

Resistance to UV: EN 50618.

Performance of water

AD5 Jets are water resistant.

Other

marking from meter to meter.

Uses

industrial application.

Design of TOXFREE ZH RZ1FZ1-K AS cable

The conductor

Class 5 (flexible) electrolytically annealed copper, according to EN 60228 and IEC 60228.

Insulation

XLPE, or cross-linked polyethylene.

In accordance with HD 308, insulated conductors are typically identified as follows:

One Natural

Two x Brown + Blue

3 G Green/yellow + Brown + Blue

Three x Black + Grey + Brown

4 G: Green/yellow + Black + Grey + Brown

Four times: Brown, Black, Grey, and Blue

5 G: Green/yellow + Blue + Grey + Black + Brown

At least six black-numbered plus green or yellow

Sheath of separation

Polyolefin inner sheath with low smoke zero halogen (LSZH) properties.

Armor

Double tape armour made of steel or aluminum. Single-core cables use aluminum armor to prevent parasite currents that could cause the cable to overheat. The multicore cables are made of steel tape.

External sheath

IEC 60502-1 classifies Low Smoke Zero Halogen (LSZH) polyolefins as type ST8, while UNE 21123-4 classifies them as type DMZ-E. Green, fire-retardant, and non-toxic.

LOW VOLTAGE 0,6/1kV

Maximum conductor temperature: 90ºC.

Industrial use.

Flame non-propagation based on EN 60332-1 and IEC 60332-1

EN 60332-1 / EN 60332-3 / EN 50267-1 / EN 50267-2 / EN 61034

Technology

1. Class 5 (flexible) conductor electrolytic copper, according to EN and IEC 60228.
2. Cross-linked polyethylene (XLPE) insulation.
Insulated conductors are typically identified as follows:
One Natural
Two x Brown + Blue
3 G Green/Yellow + Brown + Blue
Three x Brown, Black, and Grey
4 G Yellow/green + Black + Grey + Brown
Four times: Brown, Black, Grey, and Blue
Five grams of brown, black, grey, blue, and yellow/green
At least six black-numbered plus green or yellow
3. Low smoke zero halogen (LSZH) polyolefin inner sheath for armor bedding.
4. Armour Double tape armour made of steel or aluminium. Single-core cables use aluminum armor to prevent parasite currents that could cause the cable to overheat. The multicore cables are made of steel tape.
5. Low Smoke Zero Halogen (LSZH) polyolefin type ST8 for the outer sheath, in accordance with IEC 60502-1, and type DMZ-E for UNE 21123-4. Non-toxic, fire retardant, and green in color.