XTREM H07RN-F

Low voltage appliances, such as electric motors and submersible pumps in deep water installations, as well as numerous other electrical devices, can be powered by Xtrem® H07RN-F rubber cables. The Xtrem® H07RN-F cable's exceptional mechanical strength and flexibility make it perfect for power transmission in both fixed installations and mobile services. According to HD 516, the insulating material's excellent dielectric qualities allow the nominal voltage to reach 1000 V. The Top Cable All kinds of electrical equipment, including motors and submersible pumps in deep water installations, can be powered using Xtrem® H07RN-F cables (AD8).

Performance of the XTREM® H07RN-F cable
Electrical functionality

LOW V (450/750 V)

Typical

IEC 60092-353, EN 50525-2-21, and IEC 60245

Acceptances

HAR, DNV, CE, RoHS, AENOR

Certificate of safe drinking water

Regulation of Construction Products (CPR)

Eca

Thermal efficiency

90ºC is the maximum conductor temperature.

250ºC is the maximum short-circuit temperature (maximum 5 s).

For fixed and shielded installations, the minimum service temperature is -40°C; for mobile use, it is -25°C.

Performance of fire

non-propagation of flames according to IEC 60332-1 and EN 60332-1.

In accordance with EN 50575, the response to fire CPR is Eca.

Performance of mechanical systems

Three times the cable diameter (up to 12 mm2) is the minimum bending radius. 4 times wire diameter (starting at 12 mm2).

Medium severity AG2 impact resistance.

Performance of chemicals

Excellent resistance to chemicals and oil.

Excellent resistance to mineral and grease oils.

Performance of water

Resistance to water: AD8 Submersion.

AS/NZS 4020-based cable for submersible pumps in potable water.

Wells that are deep

Potable water

AWQC.

Other

marker from meter to meter.

Conditions of installation

Outside.

Cable for submersible pumps: Uses

industrial use.

usage on the go.

robotics.

Windmills

installations on temporary sites.

Packing

Available in drums and 100-meter rolls.

Design of the XTREM H07RN-F cable conductor

Class 5 (flexible) electrolytic copper, based on EN 60228 and IEC 60228.

Insulation

EI7 rubber, as defined by EN 50363-1.

The following is the standard identification as per HD 308 and EN 50334:

One Natural

Two x Brown + Blue

3 G Yellow/Green + Brown + Blue

Three x Black + Grey + Brown
4 G Yellow/Green + Black + Grey + Brown

Four times: Brown, Black, Grey, and Blue
Five grams of brown, black, grey, blue, and yellow/green

Six or more black numbers plus green or yellow

External sheath

Flexible rubber, black in color, type EM2 per EN 50363-2-1.