POWERHARD M RVhMVh-K AWA/SWA

POWERHARD M RVhMVh-K AWA/SWA cable can also be used in installations such as production plants, agricultural facilities, street lighting and installations in general where the cable is subject to high mechanical aggression. This cable is also available in hydrocarbon resistant version. POWERHARD M RVhMVh-K AWA/SWA cable performance Electrical performance LOW VOLTAGE 0,6/1kV Standard IEC 60502-1 Approvals BUREAU VERITAS / CE / RoHS CPR Construction Products Regulation Eca Thermal performance Maximum conductor temperature: 90ºC. Maximum short-circuit temperature: 250ºC (max. 5 s). Minimum service temperature: -40ºC (fixed and protected installations). Minimum installation and handling temperature: 0°C (on cable surface). Fire performance Reaction to fire CPR: Eca, according to EN 50575. Reduced halogen emission. Chlorine <15%. Mechanical performance Minimum bending radius: x10 cable diameter. Impact resistance: AG4 High severity. Rodent proof. Environmental performance Chemical & Oil resistance: Good. UV Resistant: UNE 211605. Water resistance: AD7 Immersion. Other Meter by meter marking. Installation conditions Open Air. Buried. In conduit. Applications Industrial use. POWERHARD M RVhMVh-K AWA/SWA cable design Conductor Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228. Insulation Cross-linked polyethylene insulation type DIX-3 according to HD 603 and XLPE according to IEC 60502-1. The standard identification of insulated conductors according to HD 308, is the following: 1 x Natural 2 x Blue + Brown 3 G Blue + Brown + Green/yellow 3 x Brown + Black + Grey 3 x + 1 x Brown + Black + Grey + Blue (reduced cross section) 4 G Brown + Black + Grey + Green/yellow 4 x Brown + Black + Grey + Blue 5 G Brown + Black + Grey + Blue + Green/yellow 6 G or more Brown + Black numbered + Green/Yellow Inner covering PVC. Armour Galvanized steel wire armour. Aluminium armour is used in single-core cables to avoid parasite currents that may overheat the cable. Outer sheath PVC outer sheath type ST2 according to IEC 60502-1. Black color.