TOXFREE ZH XTREM H07ZZ-F (AS)

A flexible mobile service cable called TOXFREE ZH Xtrem H07ZZ-F (AS) is appropriate for installations that need to emit halogen-free fumes and minimal smoke during a fire. Ideal for windmills, agricultural applications, motors and portable machinery on construction sites, machines in industrial and agricultural workshops, and installations where the cable must sustain medium mechanical stress.

Performance of the TOXFREE ZH XTREM H07ZZ-F (AS) cable
Electrical functionality

450/750 V LOW VOLTAGE

Typical

EN 50525-3-21

Approvals and standards

HAR, CE, UKCA, and AENOR

Regulation of Construction Products (CPR)

B2ca-s2b, d1, a1 (based on cross-section)

Thermal efficiency

90ºC is the maximum conductor temperature.

250ºC is the maximum short-circuit temperature (maximum 5 s).

For protected and fixed installations, the minimum service temperature is -40ºC.

Performance of fire

flame non-propagation according to IEC 60332-1 and EN 60332-1.

Fire non-propagation according to IEC 60332-3 and EN 60332-3.

Low smoke emissions according to IEC 61034 and EN 61034: Transmittance of light > 60%

low emissions of corrosive gases in accordance with IEC 60754-2 and UNE-EN 60754-2.

According to EN 60754-1 and IEC 60754-1, halogen is free. According to EN 50575, the response to fire CPR is either B2ca-s1b, d1, a1 or Cca-s1b, d2, a1.

Performance of mechanical systems

3x cable diameter <12 mm is the minimum bending radius. Four cables with a diameter of 12 mm or more.

AG2 Medium severity impact resistance.

Performance of chemicals

Excellent resistance to chemicals and oil.

Excellent resistance to mineral and grease oils.

Performance of water

AD7 Immersion is water resistant.

Other

marking from meter to meter.

Conditions of installation

Outside.

in a conduit.

Uses

industrial application.

usage on the go.

windmills.

Cable design conductor for TOXFREE ZH XTREM H07ZZ-F (AS)

Class 5 (flexible) electrolytically annealed copper, according to EN 60228 and IEC 60228.

Conductor:

Electrolytic annealed copper, class 5 (flexible), based on EN 60228 and IEC 60228.

Insulation

LSHF Rubber type EI8 in accordance with EN 50363-5.

Insulated conductors are typically identified as follows:

One Natural

Two x Brown + Blue

3 G Yellow/Green + Brown + Blue

4 G Brown + Black + Grey + Green/Yellow

5 G Brown + Black + Grey + Blue + Green/Yellow

Six or more black numbers plus yellow or green

External sheath

Black, Low Smoke Halogen Free (LSHF) rubber type EM8 in accordance with EN 50363-6.