TOXFREE MARINE XZ1-K (AS)

An LSHF safety cable is TOXFREE ZH YMz1Kf. It doesn't release any harmful or corrosive gases in the event of a fire, protecting people and electronic devices from potential harm. It is therefore strongly advised for use in public settings like hospitals, schools, museums, bus terminals, airports, shopping centres, offices, labs, etc.

Performance of the TOXFREE ZH YMz1Kf cable

Electrical functionality

MINIMUM VOLTAGE 0,6/1kV

Typical

UNE 21123-4 and IEC 60502-1

Acceptances

AENOR, SEC, KEMA KEUR, CE, and RoHS

Construction Product Regulation, or CPR

Depending on the cross-section, B2ca s1a, d1, a1 or Cca s1a, d1, a1

Thermal efficiency

90ºC is the maximum conductor temperature.

250ºC is the maximum short-circuit temperature (maximum 5 s).

For protected and fixed installations, the minimum service temperature is -40ºC.

-0ºC is the minimum temperature required for handling and installation.

Performance of fire

According to EN 60332-1/IEC 60332-1, flames do not spread.

In accordance with EN 60332-3/IEC 60332-3 and EN 50399, fire does not spread.

Low Smoke Halogen Free, or LSHF, is based on IEC 60754-1 and EN 60754-1.

Low smoke emission according to IEC 61034 and UNE-EN 61034: Light transmittance > 80%.

low emissions of corrosive gases in accordance with EN 60754-2/IEC 60754-2.

In accordance with EN 50575, the response to fire CPR is either B2ca s1a, d1, a1 or Cca s1a, d1, a1 (see cross-section).

Performance of mechanical systems

Cable diameter x5 is the minimum bending radius.

AG2 Medium severity impact resistance.

Performance of the environment

Oil and chemical resistance: Acceptable.

In accordance with EN 50618, UV resistant.

AD8 Submersion is water resistant.

Other

marking from meter to meter.

Conditions of installation

Outside.

buried.

in a conduit.

Uses

industrial application.

public areas.

Packing

available in drums and rolls (100 m in length).

Design of the TOXFREE ZH YMz1Kf cable

The conductor

Class 5 (flexible) electrolytic annealed copper conductor in accordance with EN and IEC 60228.

Insulation

IEC 60502-1 classifies cross-linked polyethylene as type XLPE, while HD 603 classifies it as type DIX-3. In accordance with HD 308, insulated conductors are typically identified as follows:

One Natural

Two times Brown + Blue

3 G Green/Yellow + Brown + Blue

Three x Black + Grey + Brown

(reduced cross-section) 3 x + 1 x Brown + Black + Grey + Blue

Four G: Brown, Black, Grey, and Green/Yellow

Four times: Brown, Black, Grey, and Blue

5 G Brown + Black + Grey + Blue + Green/Yellow

6 G or moreGreen/Yellow + Black numbered

External sheath

Polyolefin outer sheath for Low Smoke Halogen Free (LSHF), type ST8 in accordance with IEC 60502- 1 and type DMZ-E in accordance with UNE 21123-4. The colour green.